Sutars Compact Socket In Plastic Shroud - Surface Version
This surface version is the Sutars compact socket in a plastic shroud. There are threads in the entrance hole on the front so no need for a retainer nut. Well, suitably cut the front will do as retainer nut, should you later decide to recess the socket.
The Plant-on Socket is the one to use when recessing is difficult. It costs a little more than a recessable Socket, but since it takes only two small screw holes to fit it and no tools for a 1 1/8 inch hole, it is very often a cheaper alternative after all.
The cap can be adjusted in all directions and so the text can be read even when the socket is installed sideways on a bulkhead. The fixing hole centres are only 44 mm apart. Screws are not included as this depends on the properties of the surface being fitted too.
There should be a fuse between power source and socket.
Weight: 41g.
Maximum Amps: 16.
This surface version is the Sutars compact socket in a plastic shroud. There are threads in the entrance hole on the front so no need for a retainer nut. Well, suitably cut the front will do as retainer nut, should you later decide to recess the socket.
The Plant-on Socket is the one to use when recessing is difficult. It costs a little more than a recessable Socket, but since it takes only two small screw holes to fit it and no tools for a 1 1/8 inch hole, it is very often a cheaper alternative after all.
The cap can be adjusted in all directions and so the text can be read even when the socket is installed sideways on a bulkhead. The fixing hole centres are only 44 mm apart. Screws are not included as this depends on the properties of the surface being fitted too.
There should be a fuse between power source and socket.
Weight: 41g.
Maximum Amps: 16.
