600 ampere continuous rating - 70% higher than standard switches
Accepts 4/0 battery cables
Luminous label for low light reading
Ignition protected - Safe for installation aboard gasoline powered boats
.870" (22.01mm) stud length to accept 4 or more cable terminals
1/2" (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance
Meets all American boat and Yacht Council (ABYC) requirements for battery switches
Tactile textures indicate knob position by feel only
Case design allows surface or rear panel mounting
Fits all Perko and Guest low amperage battery switch hole patterns
Accepts 4/0 battery cables
Luminous label for low light reading
Ignition protected - Safe for installation aboard gasoline powered boats
.870" (22.01mm) stud length to accept 4 or more cable terminals
1/2" (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance
Meets all American boat and Yacht Council (ABYC) requirements for battery switches
Tactile textures indicate knob position by feel only
Case design allows surface or rear panel mounting
Fits all Perko and Guest low amperage battery switch hole patterns
| Inrush Rating: 0.25 sec (10 repeats)* | 1,750 Amperes DC |
| Cranking Rating: 9.75 sec (10 repeats)* | 1,000 Amperes DC |
| Intermittent Rating: 5min (UL 1107) | 700 Amperes DC |
| Continouous Rating: (UL 1107) | 500 Amperes DC |
| Voltage Rating | 48 Volts DC Maximum |
| Case Material | Reinforced Polycarbonate |
| Terminal Hole Size | 1/2" (M12) |
| Torque | 220 in-lbs |
