Ignition protected - Safe for installation aboard gasoline powered boats
Tactile textures indicate knob position by feel only
Case design allows surface or rear panel mounting
Accepts up to 4/0 battery cables
Fits all Perko and Guest low amperage battery switch hole patterns
Luminous label for low light reading
7/8" stud length to accept multiple cable terminals
3/8" M10 Tin-plated copper studs for maximum conductivity and corrosion resistance
Meets all American Boat and Yacht Council (ABYC) requirements for battery switches
Tactile textures indicate knob position by feel only
Case design allows surface or rear panel mounting
Accepts up to 4/0 battery cables
Fits all Perko and Guest low amperage battery switch hole patterns
Luminous label for low light reading
7/8" stud length to accept multiple cable terminals
3/8" M10 Tin-plated copper studs for maximum conductivity and corrosion resistance
Meets all American Boat and Yacht Council (ABYC) requirements for battery switches
| Inrush Rating: 0.25 sec (10 repeats)* | 1,500 amperes DC |
| Cranking rating: 9.75 sec (10 repeats)* | 600 amperes DC |
| Intermittent rating: 5 min (UL 1107) | 525 amperes DC |
| Continuous rating: (UL 1107) | 300 amperes DC |
| Terminal stud, tin-plated copper | 3/8" (M10) |
| Torque | 140 in-lbs |
| Cable size to meet ratings | 4/0 |
| Voltage rating | 48 volts DC maximum |
| Cable clearance for 4/0 cables | 1.10" (28.0mm) |
| Case material | Reinforced polycarbonate |
