Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Power charger. The casing is made of cast aluminium and the electronics are molded in resin. Protected against overheating: Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the Blue Power charger will not fail. Automatic three stage charging: Once the absorption voltage has been reached, the Blue Power charger will switch to float charge 2 hours after the charge current has reduced to a low break point current (see specifications), or after a 20 hour absorption period. The battery is therefore effectively protected against overcharging and can remain permanentely connected to the charger. The charger will automatically reset and start a new charge cycle after interruption of the AC supply or after reduction of the output voltage to 12V resp. 24V due to a DC load. Two LEDs for status indication: Yellow LED: battery being charged Yellow LED and Green LED: absorption charge Green LED: float charge, the battery is charged Learn more about batteries and battery charging: To learn more about batteries and charging batteries, please refer to Victron's book Energy Unlimited - available free of charge from Victron Energy and downloadable from www.victronenergy.com
